Professional Bath Chip Repair Services in Brisbane, Gold Coast & Sunshine Coast
Why Bath Chip Repairs Are the Smart Choice
Repairing a bathtub is fast, affordable, and effective. Our repairs are designed to reduce downtime and avoid unnecessary replacement.
We also repair ceramic and porcelain bathroom sinks (including pedestal sinks)—chips, cracks and impact damage—using the same on-site colour-matching approach. See the before and after example below the quick stats on this page.
What You Can Expect
- Fixed Pricing: Repairs typically fall within $300–$600 depending on damage.
- Efficient Turnaround: Most repairs are completed in a single visit.
- Practical Use: You’ll receive clear curing and care instructions.
- Durable Finish: Professional repair systems are built to last.
Rental Properties & End-of-Lease Bath Repairs
Bath chips are one of the most common reasons tenants lose part of their bond. A small chip on the rim or drain area can be flagged by a property manager during a final inspection, and replacement quotes for a full bathtub can run into the thousands.
How we help tenants and landlords:
- We repair the chip on-site, usually in a single visit, for a fraction of the replacement cost.
- Our repairs meet the cosmetic standard expected at a bond inspection — the damage becomes virtually undetectable from normal viewing distance.
- We provide a receipt that can be submitted with your bond claim or property manager report.
- Landlords and property managers can book us directly to maintain rental properties between tenants.
If the bath has widespread enamel wear, discolouration across the whole surface, or structural cracking from an old installation, a full resurface rather than a chip repair may be needed — we will tell you honestly during assessment.
Enamel vs Acrylic Baths: How We Approach Each
Not all bath chips are the same. The material determines the repair method, the curing process, and the final finish.
Enamel (cast iron or pressed steel) baths:
- The chip usually exposes dark metal underneath, which can rust if left unsealed.
- We clean any rust, apply a bonding primer, then build up colour-matched enamel repair compound.
- Enamel repairs need careful colour matching because older baths shift in colour over decades — the original “white” may now be warm ivory or cream.
- Curing is typically UV-assisted for a hard, glossy finish.
Acrylic and fibreglass baths:
- Acrylic chips tend to be cleaner breaks without rust risk, but the surrounding area can crack or “spider web” from impact.
- We use flexible repair compounds that move with the acrylic rather than rigid fillers that can crack again.
- Colour matching on acrylic is usually more straightforward since the colour is more consistent than aged enamel.
Porcelain and ceramic basins:
- Similar to enamel baths but with a harder glaze surface.
- Chips on porcelain often have sharp edges that need careful shaping before filling.
We carry repair kits for all three material types on every job.
Common Bath Damage We Repair
We handle a wide range of bathtub damage types and surface issues.
Chips and Cracks
- Corner chips (one of the most common repairs)
- Edge damage from dropped items
- Hairline and stress cracks from impact or flexing
- Drain and faucet area chips and damage
Surface & Structural Issues
- Deep scratches, gouges, and rust spots
- Chemical damage from harsh cleaners
- Discoloration, fading, and wear patterns
- Spider web cracking and installation stress cracks
- Impact damage from recent renovations
Bathroom Vanity & Basin Repairs
We repair chips, cracks and impact damage on bathroom vanities and basins using the same colour-matching techniques as our bathtub work. This includes:
- Ceramic pedestal sinks — chips on the rim, bowl or base
- Porcelain undermount basins — edge chips and hairline cracks
- Vanity top surfaces — stone, porcelain or solid-surface tops with impact damage
- Wall-hung basins — chips from dropped items or installation damage
Vanity repairs follow the same process and pricing as bathtub chip repairs. Send photos and we will confirm whether the damage is suitable for on-site repair.
Our Expert Bath Repair Process
We have refined our repair technique through years of hands-on work. Here is exactly what happens when you choose Magicman:
- Initial Assessment (10-15 minutes) Our technician assesses the material (enamel, acrylic, fiberglass, steel), extent of damage, and exact color matching requirements.
- Surface Preparation (20-30 minutes) We clean the area with professional-grade cleaners, remove rust/loose material, and sand the surface to ensure perfect adhesion.
- Color Matching (15-20 minutes) Using professional color-matching technology, we mix custom repair compounds on-site to account for your tub’s unique age and patina.
- Repair Application (30-45 minutes) We apply specialized bonding agents and build up repair compound in layers, shaping it to match the original contours perfectly.
- Finishing and Curing (30-40 minutes) The final polish matches the gloss level and texture of your tub. We apply a protective sealant and clean the work area thoroughly.
- Quality Check (10 minutes) Before we leave, we verify the finish from all angles and provide you with clear care instructions.
Typical turnaround is discussed during quoting to match your schedule.
Bathtub Materials We Work With
Our technicians are trained and experienced with all common bathtub materials:
- Enamel Bathtubs: Cast iron, steel enamel, and porcelain finishes.
- Acrylic & Fiberglass: Standard acrylic, reinforced composites, and gel-coat fiberglass.
- Specialty Materials: Cultured marble, stone resin, and vintage/antique bathtubs.
Pricing
| Repair Type | Estimated Price | Details |
|---|---|---|
| Single Small Chip | $300 – $380 | One chip on the rim, edge or drain area (up to ~20mm). |
| Multiple Chips | $380 – $500 | 2–4 chips on the same bath, or a chip plus a scratch. |
| Crack Repair | $400 – $550 | Hairline or stress crack, sealed and colour-matched. |
| Basin or Vanity Chip | $300 – $450 | Chip or crack on a pedestal sink, undermount basin or vanity top. |
Price depends on the material (enamel is more involved than acrylic), the number of areas, and access to the bath.
Send us photos for a fixed-price quote — most quotes provided within 2 hours.
Why Choose Magicman?
- Bath Repair Specialists: We repair chipped baths, basins and vanities regularly across South East Queensland — this is a core service, not a sideline.
- Professional-Grade Materials: We use commercial bonding agents, UV-cured compounds and colour-stable pigments — never off-the-shelf DIY kits that yellow or peel.
- Honest About Limitations: If the chip is on a surface that won’t hold a lasting repair (e.g. a badly corroded enamel bath), we will tell you rather than take your money for a short-lived fix.
- Fully Insured: Public liability insured for residential and commercial properties.
- 12-Month Warranty: Covering adhesion, bonding, colour match accuracy, and workmanship under normal residential use.
Service Areas: We Come to You
As a mobile service, we bring our expertise directly to your home:
- Brisbane Metro: All suburbs including CBD, Fortitude Valley, South Brisbane, and West End.
- Gold Coast: Full coverage from Surfers Paradise to Coolangatta and the Hinterland.
- Sunshine Coast: Maroochydore, Caloundra, Noosa, and surrounding areas.
Frequently Asked Questions
Will I be able to see the repair? Our goal is professional repairs. While no repair can guarantee a “factory-new” look, our techniques make damage virtually undetectable from a normal viewing distance.
How long will the repair last? With proper care, our repairs are designed to be long-lasting. We use high-quality pigments that are color-stable and won’t fade.
Can you repair cracks or just chips? We repair both. Hairline cracks, stress cracks, and impact cracks can all be restored using our specialized bonding techniques.
Do you warranty your work? Yes! Every repair includes a 12-month workmanship warranty covering adhesion, finish, and normal residential use.
What cleaning products can I use? Avoid abrasive cleaners. We recommend mild dish soap, non-abrasive bathroom cleaners, and soft cloths.
Get Your Free Quote Today
Get your fixed-price quote in a few easy steps:
- Take clear photos of the damage.
- Fill out our quick quote form or call us.
- Receive your quote within 2 hours.
Call 0430 833 381 or submit our online form today.
✓ Expert Results
✓ 12-Month Warranty
✓ Mobile Service (We come to you)